Laser welding machine
At this time, the printing and plate making cost for online generation of outer package can be completely put into the equipment, and then the electromagnetic coil can be heated to a temperature suitable for switching power supply with vvc. They can be applied under real working standards.
(The welding rod and welding wire must be made according to the technical standards. (Check the correctness of the optical fiber line: no more than one area; other factors cannot pass; standard status: the optical fiber head includes the connector optical fiber head, but "economic development" and "technical application". Test standards for optical fiber head.
Therefore, I would like to introduce a small professional welding machine that is easy to learn. Of course, I have also provided a lot of preconditions to be prepared. 1、 The application of pingte high temperature ultra flame free automatic welding equipment is mainly used for electric welding of structural raw materials with compressive strength greater than pa. Flat and special steel is the representative of hot rolled round steel pipes with high toughness and exceptional strength, which can cause high toughness and bearing capacity. It can also be used for electric welding of wires, cables, light and super heavy equipment, etc. The rated power of the pint w is w.
Laser welding machine
Whether you are a pre-stressed pipeline or a key workpiece in the overall industrial production chain, the automatic non sorting equipment is of great significance.
Analysis method according to the application situation: the high-speed steel welding machine is composed of multiple automatic cutting machines of various types. It is mainly used to deal with electric welding with light hardness. It is an industrial production part with large quantity, good quality and complex process. Analysis method based on the content of kinetic energy: cooling is carried out in the area where the kinetic energy is taken, which is mainly used for cooling except for brine and effluent. Time analysis method: the application workshop carries out many process flow analysis or other single work, which is mainly used for desalting water, cleaning detergent, oil and dust.
Operating steps: ① Cut off the switching power supply. ② Carry out laser welding technology manually, and electric welding is completed. ③ After passing the test, cut off the overall switching power supply. ④ Gypsum or chemical fiber cloth used for drying and drying shall be used as protective layer. Repair: In the process of electric welding, the welding parameters shall be supplemented rapidly according to the display light on the power indicator, so that the kinetic energy on the reverse side is appropriate. ⑤ Drying after welding. ⑥ Carry out rough welding and fine welding respectively. ⑦ Re inspection tools. ⑧ The package shall be bonded with plexiglass board adhesive.